HDBitT HDMI Over IP CAT5e/6 Extender with IR – 395ft (120m) (HDbitTExt)

gofanco® HDMI Extender over a single CAT5e/6 cable - Up to 395ft (120m) distance at 1080p @60Hz resolution, IP network distribution, IR remote control. With HDBitT® transport protocol, you can connect up to 30 Receivers per Transmitter.

Out of stock
  • Buy 10 for $81.73 each and save 7%
  • Buy 25 for $79.97 each and save 9%
  • Buy 50 for $77.33 each and save 12%
  • 395FT HDMI EXTENSION - with EXISTING network setup: With a single Cat5e/6 cable, you can easily extend HDMI audio/video signals for up to 395ft with our HDBitTExt. Connect your HDMI source device (PC, game console, Blu-ray player, media player) to the Transmitter, utilize existing Ethernet structure in your house/office to connect the transmitter to Receiver, then connect your HDTV from a remote location to the Receiver with an HDMI cable; HDMI cables are required and sold separately

  • OVER IP NETWORK DISTRIBUTION - with MULTIPLE DISPLAYS: Direct 1-to-1 connection or 1-to-multiple through unmanaged Gigabit network routers or switches; It extends HDMI audio/video signals to synchronous output Video display is as fluent as direct connection; You can connect up to 30 Receivers per Transmitter to not only extend but split HDMI signals to multiple displays

  • LOW BANDWIDTH USAGE - Support 1080p Full HD resolution; supports 408i/480p @60Hz, 576i/576p @50Hz, 720p @50/60Hz, 1080i/1080p @50/60Hz; Auto adjustment for different cable lengths to produce the best video/audio experience. Supports 2-channel Stereo Audio

  • IR REMOTE CONTROL - Allow source device to recognize remote commands; You can control the HDMI source device at a secondary location with the included IR cables that forward commands over a CAT5e/6 cable for convenience

  • SIMPLE INSTALLATION - No software is required. Surface mountable metal housing with included brackets allows easy placement and provides durability and higher level of RF/EMI shielding; FCC, CE & RoHS compliant. Our products are backed with a ONE YEAR limited warranty and experienced tech support team in Silicon Valley. If you have any questions or concerns, please do not hesitate to contact us directly.

gofanco® HDMI CAT5e/6 Extender with IR – 120m extends HDMI audio/video signals over one cost effective CAT5e/6 cable, while maintaining signal strength and superior audio/video quality. HDMI signal transmission can be delivered directly with 1-to-1 connection or with existing network Gigabit routers or switches. With HDBitT® transport protocol, you can connect up to 30 Receivers per Transmitter to not only extend but split HDMI signals to multiple displays. IR remote control feature allows users to control the source device from a long distance, typically where the HDTV is located.

- A good quality CAT5e/6 cable is essential in delivering quality content. CAT6 is recommended over CAT5e
- Network setup with multiple Receivers requires unmanaged Gigabit Ethernet switches for best performance. Dedicated unmanaged Gigabit Ethernet switches are recommended
- This package comes with one Transmitter and one Receiver. For one Transmitter to multiple Receivers setup over the network, 1080p Receiver(s) can be purchased separately

- Video resolutions: 408i/480p @60Hz, 576i/576p @50Hz, 720p @50/60Hz, 1080i/1080p @50/60Hz
- Audio support: Digital stereo audio
- Transmission range: 1080p @60Hz up to 394ft (120m)
- Transport protocol: HDBitT
- Housing: Metal
- Country of origin: China
- Regulatory approvals: FCC, CE, RoHS

Compatible Devices
- HDMI source device, such as computer PCs, game consoles, Blu-ray players, and media players
- HDMI displays, monitors, and HDTVs

What's in the Package
- HDMI HDBitT CAT5e/6 Extender with IR – 120m Kit (Transmitter & Receiver units)
- IR TX cable
- IR RX cable
- Power adapters (2)
- User’s guide

Warranty & Support
- Limited One-Year Warranty and Lifetime Product Support

Product Demonstration:

More Information
Max Resolution/Refresh Rate1080p@60Hz
Max Distance395 ft / 120 m
Transmission MethodEthernet/CATx
Input x OutputOne-to-One, One-to-Many
ComplianceHDMI 1.3, HDCP 1.2
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Customer Questions
How do I connect the IR transmitter and receiver?

Plug the IR transmitter into your TX unit and plug the IR receiver into the RX Unit. Make sure that the IR for the TX is facing the IR on your source device.

dose support 4 k

It only supports up to 1080p. We do have another version that supports 4K, https://www.gofanco.com/products/hdmi-extenders/hdmi-extenders-over-ethernet/hdbaset-hdmi-extender-over-cat5e-6-7-with-ir.html Thank you.

Please note that you must be logged in to submit questions

General & Standards

Video resolutions

408i/480p @60Hz, 576i/576p @50Hz, 720p @50/60Hz, 1080i/1080p @50/60Hz

Audio support

Digital stereo audio

Warranty Information


1 year


Transmission range

1080p @60Hz up to 394ft (120m)

Transport protocol


Network cable




19-pin, Type-A, female

RJ-45 connector


3.5mm connector

IR Blaster (TX); IR Receiver (RX)



Power supply

5V/1A DC

Power consumption

3.5 watts (TX); 3.0 watts (RX)

Environmental Conditions

Opertaing Temperature

32° to 104° F (0° to 40° C)

Storage Temperature

-4° to 140° F (-20° to 60° C)

Relative Humidity

20% - 90% non-condensing



Country of origin



hdbittext.pdf Manual for HDbitTExt
Manual for HDbitTExt