HDbitT HDMI Over IP CAT5e/6 Extender with Loopout - 395ft (120m) (HDbitTPRO)

gofanco® HDMI CAT5e/6 Extender with IR – 120m extends HDMI audio/video signals over one cost effective CAT5e/6 cable, while maintaining signal strength and superior audio/video quality. HDMI signal transmission can be delivered directly with 1-to-1 connection or with existing network Gigabit routers or switches. With HDBitT® transport protocol, you can connect up to 30 Receivers per Transmitter to not only extend but split HDMI signals to multiple displays.

In stock
SKU
HDbitTPRO
$94.99
  • Buy 5 for $88.34 each and save 7%
  • Buy 10 for $86.44 each and save 9%
  • Buy 20 for $83.59 each and save 12%
  • OVER LAN DISTRIBUTION - with MULTIPLE DISPLAYS: Direct 1-to-1 connection or 1-to-multiple through unmanaged Gigabit network routers or switches. You can connect up to 30 Receivers per Transmitter to not only extend but split HDMI signals to multiple displays. . Additional Receivers (HDbitTPRO-RX) are sold separately
  • 395FT HDMI EXTENSION with EXISTING network setup - With a single Cat5e/6 cable, you can easily extend HDMI audio/video signals for up to 395ft. Connect your HDMI source device to the Transmitter, utilize existing Ethernet structure in your house/office to connect the transmitter to Receiver, then connect your HDTV from a remote location to the Receiver with an HDMI cable. * Unmanaged dedicated Gigabit switches are recommended
  • LOW BANDWIDTH USAGE - Support 1080p Full HD resolution; supports 408i/480p @60Hz, 576i/576p @50Hz, 720p @50/60Hz, 1080i/1080p @50/60Hz; Auto adjustment for different cable lengths to produce the best video/audio experience. Supports 2-channel Stereo Audio
  • HDMI LOOPOUT - HDMI Transmitter is equipped with 2 port HDMI splitter; Additional HDMI output on the Transmitter to connect to a local display for monitoring. Supports IR extension, allowing source device to recognize remote commands
  • SIMPLE INSTALLATION - No driver required; Sturdy metal enclosure provides durability and minimizes EMI/RFI noise interference. FCC, CE & RoHS compliant. Our products are backed with a 1-year limited warranty and experienced tech support team in Silicon Valley. Contact us at here if you have any questions or concerns

gofanco® HDMI CAT5e/6 Extender with IR – 120m extends HDMI audio/video signals over one cost effective CAT5e/6 cable, while maintaining signal strength and superior audio/video quality. HDMI signal transmission can be delivered directly with 1-to-1 connection or with existing network Gigabit routers or switches. With HDBitT® transport protocol, you can connect up to 30 Receivers per Transmitter to not only extend but split HDMI signals to multiple displays.

Notes:
- A good quality CAT5e/6 cable is essential in delivering quality content. CAT6 is recommended over CAT5e
- Network setup with multiple Receivers requires unmanaged Gigabit Ethernet switches for best performance. Dedicated unmanaged Gigabit Ethernet switches are recommended
- This package comes with one Transmitter and one Receiver. For one Transmitter to multiple Receivers setup over the network, 1080p Receiver(s) can be purchased separately

Specifications
- Video resolutions: 408i/480p @60Hz, 576i/576p @50Hz, 720p @50/60Hz, 1080i/1080p @50/60Hz
- Audio support: Digital stereo audio
- Transmission range: 1080p @60Hz up to 394ft (120m)
- Transport protocol: HDBitT
- HDMI 1.3 and HDCP 1.2 compliant
- Network cable: UTP/STP CAT5e/6/6a/7
- HDMI loopout on Transmitter
- 3.5mm connector: IR Blaster (TX); IR Receiver (RX)
- Housing: Metal
- Power supply: 5V/1A DC
- Power consumption: 3.5 watts (TX); 3 watts (RX)
- Operation temperature: 32 ~ 140° F
- Country of origin: China
- Regulatory approvals: FCC, CE, RoHS

What's in the Package
- HDMI HDBitT CAT5e/6 Extender with Loopout – 120m Kit (Transmitter & Receiver units)
- IR TX cable
- IR RX cable
- Power adapters (2)
- User’s guide

Warranty & Support
- Limited One-Year Warranty and Lifetime Product Support

More Information
Max Resolution/Refresh Rate[email protected]
Max Distance395 ft / 120 m
Transmission MethodEthernet/CATx
Input x OutputOne-to-One, One-to-Many
FeaturesLoop Out, 3D
ComplianceHDMI 1.3, HDCP 1.2
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Customer Questions
No Questions
Please note that you must be logged in to submit questions

General & Standards

Features

-  Video resolutions:  408i/480p @60Hz, 576i/576p @50Hz, 720p @50/60Hz, 1080i/1080p @50/60Hz 

-  Audio support:  Digital stereo audio
-  Transmission range:  1080p @60Hz up to 394ft (120m) 

-  Transport protocol:  HDBitT 

-  HDMI 1.3 and HDCP 1.2 compliant 

-  Network cable:  UTP/STP CAT5e/6/6a/7 

-  HDMI loopout on Transmitter 

-  3.5mm connector:  IR Blaster (TX); IR Receiver (RX) 

-  Housing:  Metal 

-  Power supply:  5V/1A DC 

-  Power consumption:  3.5 watts (TX); 3 watts (RX)

-  Operation temperature:  32 ~ 140° F 

-  Country of origin:  China 

-  Regulatory approvals:  FCC, CE, RoHS 

Warranty Information

Warranty

Limited One-Year Warranty and Lifetime Product Support

Product Measurements

Dimensions (W x H x D)

TX,RX: 5.12″(W) x 0.89″(H) x 3.31″(D)

Weight

0.87 lbs

Housing Material

Metal

Environmental Conditions

Operating Temperature

32° to 104° F (10° to 40° C)

Storage Temperature

-4° to 158° F (-10° to 60° C)

Relative Humidity

20% ~ 90% (operating)

Certifications

FCC, CE, RoHS

Country of origin

China

Downloads