HDMI CAT5e/6 Extender with IR – 165ft (50m) (HDMIExt2)

gofanco® HDMI CAT5e/6 Extender with IR 165ft - Extends HDMI audio/video signals up to 165ft over Cat5e/6 cable. Supports 480i/480p/720p/1080i/1080p at 60Hz video resolutions and 2-channel stereo audio. HDMI Loop-Out, EDID learning, IR remote control.

In stock
Only 30 left
SKU
HDMIExt2
$45.99
  • Buy 5 for $42.77 each and save 7%
  • Buy 10 for $41.85 each and save 9%
  • Buy 20 for $40.47 each and save 12%
  • COST-EFFECTIVE SOLUTION - Extends HDMI audio/video signals over a cost-effective CAT5e/6 cable up to 165ft; Connect your HDMI source device (PC, game console, Blu-ray player, media player) to the Transmitter, run a CAT5e/6 cable from the Transmitter to Receiver, then connect your HDTV from a remote location to the Receiver with an HDMI cable. HDMI cable is required and sold separately
  • HDMI LOSSLESS TRANSMISSION - It extends HDMI audio/video signals to synchronous output Video display is as fluent as direct connection; Supports 480i/480p/720p/1080i/1080p at 60Hz video resolutions and 2-channel stereo audio; Compatible with HDCP compliant devices & content. * Note: A good quality CAT5e/6 cable is essential in delivering quality content; CAT6 is recommended for better performance
  • HDMI LOOP-OUT - HDMI Transmitter is equipped with 2 port HDMI splitter; Additional HDMI output on the Transmitter to connect to a local display for monitoring or cascade HDMI signals; Supports EDID pass-through
  • IR REMOTE CONTROL- Allow source device to recognize remote commands; You can control the HDMI source device at a secondary location with the included IR cables that forward command over a CAT5e/6 cable for convenience
  • EASY INSTALLATION - No driver required; Surface mountable metal housing with included brackets allows easy placement; Sturdy metal enclosure provides durability and minimizes EMI/RFI noise interference. Our products are backed with a ONE YEAR limited warranty and experienced tech support team in Silicon Valley. If you have any questions or concerns, please feel free to contact us directly.

gofanco® HDMI CAT5e/6 Extender with IR – 50m extends HDMI audio/video signals over one cost effective CAT5e/6 cable, while maintaining signal strength and superior audio/video quality. It supports up to 1080p resolution and extends transmission distances up to 165ft (50m). IR remote control feature allows users to control the source device from a long distance, typically where the HDTV is located.

Notes:
- A good quality CAT5e/6 cable is essential in delivering quality content. CAT6 is recommended over CAT5e
- For cable runs longer than 50ft, an STP (Shielded Twisted Pair) CAT5e/6 cable is recommended
- This kit is point to point and comes with a Transmitter and Receiver. It’s not meant to work through routers or network switches

Specifications
- Video bandwidth: Single-link 165Mhz (4.95Gbps)
- Video resolutions: 408i/480p/720p/1080i/1080p@60Hz
- Audio support: 2-channel Stereo Audio
- Transmission range: 1080p up to 165ft (50m)
- HDMI connector: 19-pin, Type-A, female
- RJ-45 connector: WE/SS 8P8C
- 3.5mm connector: IR Blaster (TX); IR Receiver (RX)
- Housing: Metal
- Power supply: 5V/1A
- Country of origin: China
- Regulatory approvals: FCC, CE, RoHS

Compatible Devices
- HDMI source device, such as computer PCs, game consoles, Blu-ray players, and media players
- HDMI displays, monitors, and HDTVs

What's in the Package
- HDMI CAT5e/6 Extender with IR – 50m Kit (Transmitter & Receiver units)
- IR TX Blaster cable
- IR RX Receiver cable
- Power adapters (2)
- User’s guide

Warranty & Support
- Limited One-Year Warranty and Lifetime Product Support

More Information
SKUHDMIExt2
Max Resolution/Refresh Rate1080p@60Hz
Max Distance165 ft / 50 m
Transmission MethodEthernet/CATx
Input x OutputOne-to-One
FeaturesLoop Out, 3D
ComplianceHDMI 1.3
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Customer Questions
Hello, Buy an HDMI CAT5e / 6 Extender with IR - 165ft (50m) (HDMIExt2). To test it I connected it with a cat6 cable of 1 meter. Using a PS3 and two TV, but I have the following problems: 1.- The HDMI OUT output of the transmitter does not generate a signal. No image is displayed on the connected device. 2.- The image obtained from the receiver's HDMI OUT, has constant random points and stripes in different places. I tried using the reset, but in neither case did I get a solution. Is it a problem with my unit? I am waiting for your answer, otherwise I will proceed to the return of the product. Thank you

Please send an email to support@gofanco.com and one of our tech agents will be able to find a solution for you.

The HDMI Ext2 says it has EDID learning but there is no switch on the unit and no instructions or mention of it in the manual. It did not detect my connected PC no matter what I tried.

For all extenders without EDID switches, there's direct communication between the source and display to obtain EDID. There are no pre-configured EDIDs programmed within our product. Please send us an email to support@gofanco.com with your full setup...

Please note that you must be logged in to submit questions

General & Standards

Specification


- Video bandwidth: Single-link 165Mhz (4.95Gbps)
- Video resolutions: 408i/480p/720p/1080i/1080p@60Hz
- Audio support: 2-channel Stereo Audio
- Transmission range: 1080p up to 165ft (50m)
- HDMI connector: 19-pin, Type-A, female
- RJ-45 connector: WE/SS 8P8C
- 3.5mm connector: IR Blaster (TX); IR Receiver (RX)
- Housing: Metal
- Power supply: 5V/1A
- Country of origin: China
- Regulatory approvals: FCC, CE, RoHS

Warranty Information

Warranty

Limited One-Year Warranty and Lifetime Product Support

Product Measurements

Dimensions (W x H x D)

7.83'' x 3.15'' x 5.87''

Weight

Weight: TX: 0.18 lbs ; RX: 0.17 lbs

Housing Material

 Metal

Environmental Conditions

Operating Temperature

32° to 104° F (10° to 40° C)

Storage Temperature

-4° to 158° F (-10° to 60° C)

Relative Humidity

20% ~ 90% (operating)

Certifications

FCC, CE, RoHS

Country of origin

China