HDMI HDbitT CAT5e/6 Extender 1080p with Loopout-120m (HDbitTPRO)
gofanco® HDMI CAT5e/6 Extender with IR – 120m extends HDMI audio/video signals over one cost effective CAT5e/6 cable, while maintaining signal strength and superior audio/video quality. HDMI signal transmission can be delivered directly with 1-to-1 connection or with existing network Gigabit routers or switches. With HDBitT® transport protocol, you can connect up to 30 Receivers per Transmitter to not only extend but split HDMI signals to multiple displays.
- Buy 5 for $102.29 each and save 7%
- Buy 10 for $100.09 each and save 9%
- Buy 20 for $96.79 each and save 12%
- OVER LAN DISTRIBUTION - with MULTIPLE DISPLAYS: Direct 1-to-1 connection or 1-to-multiple through unmanaged Gigabit network routers or switches. You can connect up to 30 Receivers per Transmitter to not only extend but split HDMI signals to multiple displays. . Additional Receivers (HDbitTPRO-RX) are sold separately
- 395FT HDMI EXTENSION with EXISTING network setup - With a single Cat5e/6 cable, you can easily extend HDMI audio/video signals for up to 395ft. Connect your HDMI source device to the Transmitter, utilize existing Ethernet structure in your house/office to connect the transmitter to Receiver, then connect your HDTV from a remote location to the Receiver with an HDMI cable. * Unmanaged dedicated Gigabit switches are recommended
- LOW BANDWIDTH USAGE - Support 1080p Full HD resolution; supports 408i/480p @60Hz, 576i/576p @50Hz, 720p @50/60Hz, 1080i/1080p @50/60Hz; Auto adjustment for different cable lengths to produce the best video/audio experience. Supports 2-channel Stereo Audio
- HDMI LOOPOUT - HDMI Transmitter is equipped with 2 port HDMI splitter; Additional HDMI output on the Transmitter to connect to a local display for monitoring. Supports IR extension, allowing source device to recognize remote commands
- SIMPLE INSTALLATION - No driver required; Sturdy metal enclosure provides durability and minimizes EMI/RFI noise interference. FCC, CE & RoHS compliant. Our products are backed with a 1-year limited warranty and experienced tech support team in Silicon Valley. Contact us at here if you have any questions or concerns
gofanco® HDMI CAT5e/6 Extender with IR – 120m extends HDMI audio/video signals over one cost effective CAT5e/6 cable, while maintaining signal strength and superior audio/video quality. HDMI signal transmission can be delivered directly with 1-to-1 connection or with existing network Gigabit routers or switches. With HDBitT® transport protocol, you can connect up to 30 Receivers per Transmitter to not only extend but split HDMI signals to multiple displays.
Notes:
- A good quality CAT5e/6 cable is essential in delivering quality content. CAT6 is recommended over CAT5e
- Network setup with multiple Receivers requires unmanaged Gigabit Ethernet switches for best performance. Dedicated unmanaged Gigabit Ethernet switches are recommended
- This package comes with one Transmitter and one Receiver. For one Transmitter to multiple Receivers setup over the network, 1080p Receiver(s) can be purchased separately
Specifications
- Video resolutions: 408i/480p @60Hz, 576i/576p @50Hz, 720p @50/60Hz, 1080i/1080p @50/60Hz
- Audio support: Digital stereo audio
- Transmission range: 1080p @60Hz up to 394ft (120m)
- Transport protocol: HDBitT
- HDMI 1.3 and HDCP 1.2 compliant
- Network cable: UTP/STP CAT5e/6/6a/7
- HDMI loopout on Transmitter
- 3.5mm connector: IR Blaster (TX); IR Receiver (RX)
- Housing: Metal
- Power supply: 5V/1A DC
- Power consumption: 3.5 watts (TX); 3 watts (RX)
- Operation temperature: 32 ~ 140° F
- Country of origin: China
- Regulatory approvals: FCC, CE, RoHS
What's in the Package
- HDMI HDBitT CAT5e/6 Extender with Loopout – 120m Kit (Transmitter & Receiver units)
- IR TX cable
- IR RX cable
- Power adapters (2)
- User’s guide
Warranty & Support
- Limited One-Year Warranty and Lifetime Product Support
General & Standards | |
---|---|
Features |
- Video resolutions: 408i/480p @60Hz, 576i/576p @50Hz, 720p @50/60Hz, 1080i/1080p @50/60Hz - Audio support: Digital stereo audio - Transport protocol: HDBitT - HDMI 1.3 and HDCP 1.2 compliant - Network cable: UTP/STP CAT5e/6/6a/7 - HDMI loopout on Transmitter - 3.5mm connector: IR Blaster (TX); IR Receiver (RX) - Housing: Metal - Power supply: 5V/1A DC - Power consumption: 3.5 watts (TX); 3 watts (RX) - Operation temperature: 32 ~ 140° F - Country of origin: China - Regulatory approvals: FCC, CE, RoHS |
Warranty Information | |
Warranty |
Limited One-Year Warranty and Lifetime Product Support |
Product Measurements | |
Dimensions (W x H x D) |
TX,RX: 5.12″(W) x 0.89″(H) x 3.31″(D) |
Weight |
0.87 lbs |
Housing Material |
Metal |
Environmental Conditions | |
Operating Temperature |
32° to 104° F (10° to 40° C) |
Storage Temperature |
-4° to 158° F (-10° to 60° C) |
Relative Humidity |
20% ~ 90% (operating) |
Certifications | |
FCC, CE, RoHS |
|
Country of origin | |
China |