1x8 HDMI 2.0 CAT Extender/Splitter (1x Transmitter & 8x Receivers) - 60m (197ft) for 4K60Hz - 1080p up to 90m (295ft)
Up to 197ft (60m) at 4K 60Hz 4:4:4 / 295ft (90m) at 1080p 60Hz, HDR HDCP 2.2, Dual IR, PoC, EDID, Loopout, 5.1-ch Digital Audio, Toslink/Analog Audio Extraction

1x8 HDMI Extender/Splitter over Cat6/7
8-Port 4K60Hz HDMI Extender/Splitter with Audio Extraction
Specification
- Compliant: HDMI 2.0 / HDCP 1.4
- Bandwidth: 18Gbps
- Resolution: 480p, 576p, 720p, 1080p, 4K30Hz, 4K60Hz
- IR Remote control: Supports 20-60KHz wide frequency remote control
- Audio spec: Up to 5.1 ch HD audio
- Power adapter: TX: 12V/3A / RX: 5V/2A
- Product dimensions: TX: 12.46″(W) x 0.94″(H) x 4.86″(D) / RX: 4.34″(W) x 0.71″(H) x 2.69″(D)
- Product weight: TX: 2.091lbs / RX: 0.89lbs
- Housing Material / Color: Metal / Black color
Connection
TX
- 1x 3-pin DIP, EDID switch
- 1x 5-pin Micro USB, FW updated
- 1x 19-pin HDMI, Input
- 1x 19-pin HDMI, Output
- 8x 8-pin RJ45, Output
- 2x 3.5mm jack, IR In/Out
- 1x 3.5mm jack, Audio output
- 1x S/PDIF (Toslink), Audio output
- 1x Power jack
- 1x Reset button
RX
- 1x 8-pin, RJ45 Input
- 1x19-pin HDMI, Output
- 2x 3.5mm jack, IR In/Out
- 1x 3.5mm jack, Audio output
- 1x S/PDIF (Toslink), Audio output
- 1x Power jack
- 1x 5-pin Micro USB, FW updated
Features
- Extends HDMI transmission up to 60m (197ft) at 4K 60Hz, 90m (295ft) at 1080p
- Supports up to 4K60Hz YUV 4:4:4, HDR, HLG
- Supports up to 5.1ch digital audio & audio extraction to Toslink and Stereo
- 4K to 1080p auto downscale to support mixed 4K and 1080p displays simultaneously
- EDID management, bi-directional IR, and firmware upgradable
- PoC (Power-over-Cable) allows the TX’s power supply to power all RXs
- Equipped with factory reset button
Standard
- UPC: 818354-022971
- Operation Temperature: 23 to 104 degrees F
- Storage Temperature: -4 to 140 degrees F
- Relative humidity: 5 to 90% RH (non-condensing)
- Regulatory approvals: FCC / CE / RoHS
- Limited One-Year Warranty and Lifetime Product Support
- Country of origin: China
- 1x8 HDMI 2.0 CAT Extender/Splitter - 60m (TX/ RX(8))
- IR Emitter cable (9)
- IR Receiver cable (9)
- Power adapter (12V/3A)
- USB-A/M to micro B/M cable (80cm)
- Surface mount accessories
- TX Rubber pad (4pcs)
- User Guide

Manual
Poor video quality or no video signal on display:
- Check whether the HDMI cables are connected properly and are in good working condition.
- Make sure the resolution of the display is compatible with the splitter's resolution
No HDMI signal output from the CAT6/7 connectors while the local HDMI out port is working normally:
- Check whether the HDMI cables are connected properly and are in good working condition.
Splash screen on the displays:
- Cause by damaged or low quality HDMI cables.
- Change to a higher quality HDMI cable.





























